跳至主要内容

Pump selection

Usually when we select a pump, we will ask the user the capacity, lift requirements, the capacity and head can not be determined, it can not be positive accurate selection.
Normally,Customers should tell us the working situation such as what is the vertical height,what is the horizontal distance,how are the pipes arranged.elbow quantity,caliber of pipeline, what kind of liquid need to be transported.
We will make sure what kind of pump we used first and then according to the working situation choose the exactly item number.
The required lift can be calculated according to the vertical height of the transmission, the elbow and the horizontal distance, and the loss of the pipeline.
Jiangxi Gelaili pump industry since its inception, specializing in the production of various types of submersible pumps, centrifugal pumps and other automatic frequency of water supply.
Electric pump products are widely used in urban, industrial and mining enterprises, water supply and drainage, farmland irrigation, water conservancy projects, geothermal utilization,
Chemical medicine, drinking water, environmental protection and other industries.
Our mainly products are: aquarium water pump , shower pump, booster pump,ro booster pump,dewatering pumps,dirty water pump and so on...
welcome to visit our plant,and we can help you select your pump.



评论

发表评论

此博客中的热门博文

Causes of Electric Motor Burning by Water pump

1. First, find out whether the motor burns the bearing (mechanical fault) or the coil (electrical fault). If it is the fault of burning coil, it is mainly caused by overcurrent, sometimes too high or too low voltage will also cause the coil to heat and short circuit, so check that the voltage when running is too different from the rated voltage.There may be several reasons for over-current short-circuiting: A. the equipment is overloaded to make the motor run for a long time at rated or over rated current. In particular, the starting current of the motor is 3-5 times that of the rated current. Therefore, we should try to avoid running with load or full load when starting the equipment (mainly depending on the matching allowance of rated current and normal operating current of motor). B, the motor works in a wet working environment. The insulation of the coils should be checked before the motor starts. The insulation requirements of different voltage grades are also different. May r...
发表评论
阅读全文

The advantages of the stainless steel centrifugal pump

The stainless steel  centrifugal water pump  can be used to convey various medium from tap water to industrial liquid at different temperature with different flow and pressure.the stainless steel  centrifugal water pump  can be used to transport the liquid,which PH Value is 5-9,the liquid can be slightly alkaline water,take off a mineral water,distilled water,swimming pool water,chloride liquid, they are anti-corrosion pumps. Stainless steel  centrifugal water pump  can last for a long time, stainless steel gear pump because the high quality material and light weight rotating parts, the stainless steel  centrifugal water pump  life expectancy is much longer than the ordinary pump. Gelaili pump industry ,supply professional stainless steel water pump. www.jxgllpump.com
发表评论
阅读全文

Difference between suction stroke and lift head of water pump

Pump self-priming capacity is also called maximum self suction height.It is the maximum height at which the water is pumped (the vertical distance between the pump and the the liquid surface to be pumped) without fill in water into the pump tunnel. General water level is lower than the location of the pump, you need to pump self-priming capacity.For example ,if we need to pump water from a river ,we will not plan pipe first,so we need a pump which has self-priming capacity. Or we need to pump some corrosive liquid,we can not fill water into the water pump tunnel. Some centrifugal water pumps do not have self-priming capacity,they need to fill in water at first time of using. The pump lift is the height that pump can lift water up.We usually expressed in H,the the unit is meter. The lift of the centrifugal pump is based on the center line of the impeller.The lift Consists of two parts,first is the vertical height from the center line of the pump impeller to the surface of the water s...
发表评论
阅读全文